RGB AnalyserRGB分析儀FEASA

RGB分(fēn₽")析儀 Feasa RGB LED分析λ¶₽✔儀是設計用于測量RGB LED，RGB LED 光(guān₽♦×g)通過蝕刻或油漆時的(de)背光開關和(hé±☆∏<)面闆 塑料鑲闆；比如在汽車儀表闆上。 該分(f'®ēn)析儀測試了(le)強度、同質性、xy色度、主導波長(chán←♦∑εg) 和CCT的(de)準£₽确、可靠、快速。 RGB LED分析儀可♣ ±∞(kě)在6和10通道配置。 6個通(tōng≤")道單元的(de)尺寸為105x55x50mm；10通(♠ tōng)道型号為 145x55x50mm.每個(gè δπ)通道光纖的(de)長(chánπ¥g)度為0.6m，光纖的(de)直徑為2.2mm， 包®•¶Ω括包層，彎曲半徑為50 mm。從(c≠>∏σóng)最低限度開始操作 亮度為0. ≈<™5cd/m2，最大亮度為1000 cd/m2，溫度範圍為(w<≈ Ωèi)0-50°C。 對于單色和R☆≤GB顔色，精确到±0.01@ x=0.33，y✔€=0.33，可重複性為±0.002和<，強度的(de)1%。可(<₹€kě)用的(de)接口： USB，串行 ₩©™，和雛菊鏈。 軟件：提±γΩ供設置軟件；示例命令行(xíλ¥ng)接口C、C++；DLL、Labview支持。$± 型号：3RGB、5RGB、6RGB、10RGB RGBσ✔ Analyser The Feasa RGB LED Analyser was ↔ ¶designed for measuring RGB ₹δφ•LEDs, RGB LED backlit switches anα₩♠d panels where the light is tra≤☆velling through etched or painted ≈> plastic panelling; such as on ™φ‍car dashboards. This analyser t'∞Ω​ests for intensity, homogeneity, xy Chromati☆<©city, Dominant Wavelength a®•'nd CCT accurately, relia≠←₹'bly and quickly. The RGB LED Ana✘€Ω©lyser is available in 6 and 10 channel↑™§® configurations. Th©©e dimensions of the 6 channel units ∏≈±is 105x55x50mm; the 10 channel model is 145≠ ♣x55x50mm. Each channel fiber £∏↓ has a length of 0.6m, the fiber has a diameter™¥↓ of 2.2mm, including claddingβσ , and a bend radius of 50 mm. O‌ ♠'perating from a minimum luminance of 0.5cd/₹>m2 and a maximum lum↑↑$₽inance of 1000 cd/m2 anλ↓¥>d temperature range of 0-50°C.  ↓♥δ Accurate to ±0.01@ x=0.33, y=>Ω0.33 for monochromatic and RGB colours, ∏÷with repeatability of ±0.< ♦$002 and <1% of intensity.  &✘ Available Interfaces: USB, S ₩erial, and Daisy Chain. Soft¶✘¥≠ware: Set up so􀅌ware provided;‍® Sample command line inter¥&¶face C, C++; DLL, Labview "Ω support. Models: ∞↔<φ 3-RGB, 5- RGB, 6-RGB, 10-RGB